GSS Systems > GSSProduct > MC01 Moisture Monitoring & Control

MC01 Moisture Monitoring & Control

  • Data Model Based Moisture Control 

  • Measuring Real-time Product Moisture

  • Dryer Control

  • Large Display and Control Panel 

  • Data Model Based Moisture Control 

  • Measuring Real-time Product Moisture

  • Dryer Control

  • Large Display and Control Panel 

Introduction

The MC01 is the premier control system using long time industry proven, GMC model based control strategy. Stainless steel constructed moisture sensors provide a long service life and are easy to calibrate against a bench top tester.The MC01 is achieved by optimizing the products residence time. The system tracks inlet moisture, drying temperature, outlet moisture and discharge rate to determine the optimum dryer speed to bring as much product close to target as possible. 

The system will interface with the most modern Variable Frequency Drives directly and usually only requires a small isolation interface to operate non isolated SCR type DC drive controllers.

The system stores data to a memory module for retrieval to a computer using the terminal communication port.   

Features

For Products 

Corn, Beans, Wheat, Canola, Sunflower, Rice, Meal, Flour, Starch etc.

Record Keeping

Total Remote Control Functions

Direct connection to Windows PC. Able to be networked for remote control over the internet.

Remote Support

Using telephone modem or dedicated internet connection. Required for summary reports, dryer analysis, system setup, and help.

Specifications

Specification subject will be upgraded with technology improvement

Operating Range, MC01 Control Panel

Temperature, 0℃ to + 40℃, 32℉ to +104℉;   

Relative Humidity, 5% to 95% non condensing;  

Nema 2; 

Operating Range, Moisture Sensor:

Temperature, -35℃ to +60℃ (-31℉ to +140℉);  

Relative Humidity, 5% to 95% non condensing;   

Nema 4, Explosion Proof and intrinsically safe models available;    

Moisture Range, 7% to 35%, product dependent;    

Product temperature range  

-35℃ to +60℃ (-31℉ to +140℉); 

Power Requirements:

100 to 250VAC 25VA for MC01 Control Unit;   

20 to 30 VDC, 20mA for the Moisture Sensors;   

The Moisture Sensors are powered by the MC01 Control Unit;   

One 4 wire instrument cable connects each Moisture Sensors to the MC01 Control Unit;

Signal layout:

RJ45 Port for PC connection;  

0-10 VDC or 4-20mA Output to dryer Speed Controller;  

0-10 VDC or 4-20mA Dryer Speed feedback signal;  

Calibration button, 24 VDC 200mA; 

Remote alarm signal, dry contact; 

Favorite Return